CHL8314 – 4 Phase Digital PWM Controller with SMBus

CHL8314 Preliminary Product Brief (pdf)
CHL8314 Preliminary Product Datasheet (pdf) registered users only

FEATURES

• Intel VR11.1, VR11.0 compliant Digital PWM
• Selectable from 1 to 4 phase operation

Parametric Data

	Min	Max
Vbias	3.1V	3.5V
Vout	0.5V	2.3V
Fsw	200kHz	1MHz
Iout		>120A

• Switching frequency configurable from 200kHz to 1MHz
  • Accuracy better than 5% & Ultra low jitter
• Customized Digital over-clocking features
  • Easy to use SMBus Gamer command
  • Gamer VID to 2.3V, VID override or track, digital load line adjust
  • Gamer OCP, OVP, OTP, OFF
• CHiL Efficiency shaping features from light to full load
  • Dynamic Phase Control - 3 programmable regions
  • Variable Gate Drive - gate voltage proportional to output current
• 1- or 2-phase PSI for light load efficiency
• Enables thermal phase balancing

• SMBus fault indicators: OVP, UVP, OCP, OTP
• SMBus interface for configuring and monitoring current & power
• Load Line configurable from 0.6mΩ to 1.4mΩ
• Nine bytes of NVM storage available for customer use
• Compatabile with CHiL ATL & tri-state MOSFET drivers
• +3.3V supply voltage; 0ºC to 85ºC operation
• RoHS compliant, MSL Level 1 package 

DESCRIPTION

The CHL8314 is fully compliant with Intel VR11.1 including PSI and IMON features for high performance desktop applications. Its customized Digitial Over-clocking features, require no external components. Its SMBus interface can enable Gamer Mode with extended Gamer VID up to 2.3V with 6.25mV resolution, digital load line adjust, Gamer Vmax, and faults in Gamer mode.

The CHL8314 deploys unique efficiency shaping features to maintain a flat 90%+ efficient VR across the entire load range.

DPC (Dynamic Phase Control) allows autonomous phase add and drop.

VGD (Variable Gate Drive) optmizes the MOSFET gate drive based on the load current.

PSI can be adjusted from one to four phases for optimized light load efficiency

The unique ATA (Adaptive Transient Algorithm) based on non-linear digital PWM algorithms, uses configuration parameters stored in the internal Non Volatile Memory (NVM) to deliver unmatched fast transient response and accurate steady state behavior for optimized VR component selection and BOM.

Coupled inductor operation allows add/ drop of phases 180º out of phase to improve transient response and form factor.

The CHL8314 supports NTC temperature sense to report and trigger VR HOT and OTP faults. Additional features include digital thermal balancing, digital steady state and transient balancing of phase currents and extensive fault configuration and monitoring capability. The CHL8314 includes a unique sensorless and lossless input current monitoring capability.

Design and debug is greatly simplified by use of the CHiL IPD (Intuitive power Designer) GUI to easily access the registers for a “set-and-forget” approach.

APPLICATIONS

Typical Application

• Intel® VR11.x CPU VRD and VRM
• High performance Desktops, Servers & graphics cards
• DDR memory
• Overclocking and high efficiency VRs

DESIGN TOOLS

CHiL IPD - The IPD (Intuitive power Designer) is a graphical user interface (GUI) used to assist in multiphase VR designs using the CHL8314 controller. It is a comprehensive tool that encompasses the three key elements of bringing an easy digital VRD design to production: Design, Configuration and Monitoring.

Device Layout Symbol - Library files for device layout in Cadence® Allegro® version 15 format

RELATED DEVICES

• CHL8500 - Synchronous Buck MOSFET Driver with CHiL ATL (Active Tri Level) PWM signal for phase shedding

ORDERING INFORMATION

Part #	Status	Temp (ºC)	Package/ Pins	Standard quantity	RoHS Compliance
CHL8314CRT	Active	Commercial	QFN / 48	Tape & reel, 3000	Y